
License Plate Frame: Dual Fastening Holes for a Secure Fit
The Bellame License Plate Frame uses dual fastening holes at the top for a secure, level fit. Call (833)-235-5263 for order questions.
A license plate frame is one of those small details that rarely gets attention until something goes wrong. A rattling plate, a frame that blocks registration stickers, or hardware that loosens after a few weeks of highway driving can turn a simple accessory into an ongoing annoyance. The Bellame License Plate Frame takes a straightforward approach: a clean design built around a practical detail that matters more than most drivers realize. That detail is the placement of the mounting holes, and it is worth understanding why it makes a difference before you buy any frame.
This guide walks through what the frame offers, how dual fastening holes at the top affect installation and stability, how to mount it correctly, and how to care for it over time. It also covers the questions shoppers ask most often about plate frames in general, so you can make a confident decision rather than guessing at the auto parts store.
What the Bellame License Plate Frame Offers
The License Plate Frame is a simple, purpose-built accessory priced at $9.99. Its defining feature is the pair of dual fastening holes located at the top of the frame. That is the entire specification available on the product page, and it tells you most of what you need to know: this is a frame designed to mount securely using the top two holes of a standard license plate, which is the most common mounting configuration on passenger vehicles.
Dual fastening holes at the top serve a specific engineering purpose. When a frame relies on only one top hole, or on holes that sit lower on the frame, the plate can pivot slightly around the single attachment point. Over time, that movement loosens screws and produces the buzzing or rattling sound drivers notice at speed. Two top holes create a fixed horizontal anchor, so the plate stays square and flat against the vehicle. It is a small design choice with an outsized effect on day-to-day ownership.
The frame also comes with a 45 day money back guarantee, which lowers the risk of trying it. If the fit or finish is not what you expected, you have a defined window to return it. That policy is stated clearly on the product page, so there is no ambiguity about the terms.
Why Dual Fastening Holes at the Top Matter
Most vehicles in North America use a four-hole plate pattern, but many drivers only use the top two holes because the bottom ones are blocked by the bumper, a bracket, or the frame itself. A frame with dual top holes matches this real-world pattern. You screw the frame and plate into the top two mounting points, and the plate hangs flush and level. No drilling, no adapters, no improvisation.
There is also a legal consideration that many drivers overlook. Several states require that a license plate frame not obscure any part of the registration sticker, the state name, or the plate number. A frame that mounts only at the top tends to sit higher and leaves the bottom corners of the plate visible, which reduces the chance of a compliance issue during a traffic stop or inspection. The dual top holes help keep the frame positioned where it belongs instead of sliding down over the plate face.
From a maintenance standpoint, two fasteners distribute load more evenly than one. A single screw carries the entire weight of the plate and frame, and vibration concentrates at that one point. With two top fasteners, the load splits, so each screw experiences less stress. That means less chance of stripped threads, wallowed-out holes, or a screw backing out on a rough road.
How to Install the Frame Correctly
Installation takes only a few minutes and requires nothing more than a screwdriver and the hardware already on your vehicle. The steps below assume a standard top-two-hole mounting configuration, which is the setup the frame is built for.
- Remove the existing screws from the top two holes of your license plate using a screwdriver that matches the screw head. Keep the screws in a safe place, since you will reuse them.
- Hold the plate against the frame and align the top holes of the plate with the dual fastening holes at the top of the frame. Confirm that the frame does not cover the registration sticker or any printed information on the plate face.
- Position the plate and frame against the vehicle mounting points and start both screws by hand. Hand-starting prevents cross-threading, which is the most common installation mistake.
- Tighten the screws evenly, alternating between the two so the frame seats flat. Stop when the frame is snug; overtightening can crack the frame or strip the mounting threads.
- Grip the frame and give it a gentle wiggle test. If it moves, tighten slightly and check again. If it stays firm, installation is complete.
If your vehicle uses a four-hole pattern and you want extra security, you can add bottom fasteners through the plate itself, but the frame's design centers on the top pair. Do not drill new holes in the frame to force a fit. If the holes do not line up with your vehicle, the frame is not compatible, and the money back guarantee is the right path forward.
Everyday Care and Longevity
A license plate frame lives in a harsh environment. It sees road salt, UV exposure, car wash chemicals, and constant vibration. A few simple habits keep it looking and functioning well for years. First, wash the frame whenever you wash the car, using the same soap and water you use on the paint. Avoid abrasive pads or harsh wheel cleaners, which can dull the finish. Second, check the fasteners every few months, especially after winter. A quarter turn with a screwdriver is usually all it takes to keep things tight. Third, if you notice rust on the screws, replace them with stainless hardware. The screws, not the frame, are usually the first component to degrade.
When you remove the frame for cleaning or a plate change, inspect the mounting holes for cracks or elongation. A frame that has been overtightened can develop hairline cracks around the holes, which eventually cause it to fail. If you see damage, replace the frame rather than reinstalling it. At $9.99, replacement is inexpensive, and a secure plate is a legal requirement in every state.
Who This Frame Suits Best
This frame fits drivers who want a clean, functional accessory without paying for decorative extras. It is a practical choice for daily drivers, fleet vehicles, and anyone who has dealt with a rattling or sagging plate. It is also a sensible option for new car owners who want to replace a dealership frame with something simpler and less branded.
Drivers who want a showpiece frame with custom engraving or a chrome finish should look elsewhere, since the product page describes a basic frame rather than a decorative one. Drivers who need a frame for a vehicle with an unusual mounting pattern, such as a side-mount or a motorcycle plate, should verify compatibility before ordering. For the vast majority of cars, trucks, and SUVs with a standard top-two-hole pattern, this frame does exactly what it should.
Common Questions About License Plate Frames
Drivers researching frames tend to ask the same handful of questions. The answers below address the most frequent concerns, with the caveat that state laws vary and you should confirm local requirements with your motor vehicle agency.
- Are license plate frames legal? In most states, yes, as long as the frame does not obscure the plate number, state name, or registration stickers. Check your state's rules before installing a frame with wide borders.
- Do I need special tools? No. A standard screwdriver that matches your existing plate screws is sufficient. The frame reuses your vehicle's current hardware.
- Will the frame fit my car? The frame is designed for standard top-two-hole mounting, which covers most passenger vehicles. Measure your plate and mounting points if you are unsure.
- Can I use the frame with only one screw? It is possible, but not recommended. Using both top holes is what keeps the plate stable and prevents rattling.
- What if the frame arrives damaged? The 45 day money back guarantee covers your purchase, so contact the seller through the product page for return instructions.
One more point deserves emphasis: plate frames are regulated accessories, not free-form decorations. A frame that covers the bottom third of your plate may look sleek in a photo, but it can create problems at inspection time or during a traffic stop. The Bellame frame's top-mounted design naturally avoids this issue because the fastening points sit at the top edge, leaving the plate face unobstructed.
Making the Purchase Decision
At $9.99, the License Plate Frame is an easy add-on to any order, and the money back guarantee removes most of the risk. Before you buy, do a quick compatibility check: confirm that your vehicle uses a top-two-hole plate mount, confirm that the frame will not cover your registration stickers, and confirm that you have a screwdriver that fits your existing screws. If all three check out, installation is a five-minute job with no surprises.
For readers who want to explore the broader Bellame catalog, including skincare, makeup, haircare, body care, and wellness guides, the editorial team at Bellame.MX publishes independent, original guides that explain product categories and help you shop with confidence. Product names match the public Bellame.com shop, while the descriptions are written independently, so you can research before you buy. The site does not take orders or process payments; all pricing, availability, and checkout happen on bellame.com.
If you are ready to secure your plate with a frame that mounts the way most vehicles are actually built, visit the License Plate Frame product page to check current pricing and place your order. A snug, level plate is a small victory, but it is one you will appreciate every time you walk up to your car.